In the operation of shredders, blade wear is inevitable. When blade quality decreases, energy consumption rises, cutting edges chip, or alloy edges wear down to 0.2mm, it’s time to replace the blades immediately.
Precautions:
- Ensure the machine is powered off before any operation to prevent accidents.
- Avoid direct contact with the sharp edges of the blades to prevent injuries.
- Pay attention to the blade’s direction during installation to ensure cutting efficiency.
Blade Replacement Steps:
- Make sure the shredder is powered off for safety. Use tools to loosen the screws on the blade holder.
- Carefully remove the blade holder and the blade itself. Use additional tools if necessary.
- Place the new blade into the holder and install it in reverse order, making sure the direction and position are correct.
- Tighten the screws with tools to secure the blade, but do not overtighten to prevent damage to the screws or the blade.
- After installation, perform a test spin to ensure the blade rotates smoothly without jamming or slipping.
INQUIRIES
To learn more about this product, please send us a message using the form below: